Back to all buyer's guides
Buyer's guide
Hydraulic cylinder from Olsson Parts
At Olsson Parts, we offer a wide range of hydraulic cylinders for all types of machines and industrial applications. Our cylinders are designed for maximum performance, long service life, and reliable operation – so you can trust that the job will get done.
What is a hydraulic cylinder?
A hydraulic cylinder is a mechanical device that converts hydraulic pressure into linear motion. It is used to lift, push, or pull heavy loads with precision and efficiency.
Main components of a hydraulic cylinder:
- Cylinder tube – where the piston moves
- Piston and piston rod – create linear motion
- Cylinder mounting – different types depending on the installation
Hydraulic cylinders are used in everything from agricultural machinery and construction equipment to industrial robots, and Olsson Parts ensures that every cylinder meets the highest quality standards.
Our types of hydraulic cylinders
- Cylinder without mounts – for custom installation
- Cylinder with mounts – with spherical bearings or plain holes
- Telescopic cylinder – single-acting with multiple stages and long stroke length
Every hydraulic cylinder from Olsson Parts is thoroughly tested for durability and precision.
See all hydraulic cylinders
How to choose the right hydraulic cylinder
When buying a hydraulic cylinder, consider the following:
- Ensure correct measurements – stroke length, total length, and mounts
The most important thing is that the cylinder fits where it is supposed to be installed. Measure the stroke length, total retracted length, and check the type of mounts used – for example fork, eye, or spherical bearing. Correct measurements ensure proper function and installation without modifications.
- Choose dimensions that provide the right strength and capacity
The cylinder diameter and piston rod diameter determine how much force the cylinder can generate and how durable it is under side load and heavy work. Larger diameter gives more force – a thicker piston rod provides increased durability.
Flow rate determines the cylinder’s movement speed: smaller dimensions mean faster movement.
At olssonparts.com you will find clear measurements that make it easy to select the right specifications for your machine.
- Check working pressure and compatibility with the hydraulic system
The cylinder must withstand the machine’s maximum pressure. Check the system’s working pressure and choose a cylinder with sufficient margin for long service life and safe operation. Our cylinders have clearly specified pressure classes to ensure a safe choice.
- Ensure connections, port placement, and seals match
Make sure the ports’ thread type and placement match the machine’s hoses and fittings. Incorrect placement can cause unnecessary wear or risk of leakage.
Also choose a cylinder with seals suitable for Nordic climates and demanding environments – all our cylinders are equipped with this.
- Choose the right function – single-acting or double-acting
Base your choice on how the cylinder operates in your application:
- Single-acting: Force in one direction, common in tipping and simple lifting. Return via gravity.
- Double-acting: Force in both directions, most common on agricultural and construction machinery.
All double-acting cylinders can be adapted to function as single-acting.
Why choose Olsson Parts?
Experience and expertise – Long experience in hydraulics and machine parts
High quality – Durable materials for long service life
Fast delivery – Directly to your workshop or job site
Personal customer support – Helping you choose the right hydraulic cylinder
Maintenance tips for hydraulic cylinders
With regular maintenance, your cylinder will last longer and operate safely under tough conditions.
- Keep the piston rod clean from dirt, dust, and rust to protect the seals
- Lubricate mounting points and joints regularly to reduce wear
- Check hoses and fittings to ensure they don’t rub or cause side load
- Make sure the hydraulic system oil is clean and replaced as recommended
- Inspect the cylinder frequently to detect early signs of leaks or damage
- Replace seal kits and spare parts when needed
Tinkering tips with Olsson Parts
On the OlssonParts YouTube channel, you’ll find practical videos that help you with hydraulic work and machine maintenance. We share installation guides, troubleshooting tips, product overviews, and much more. The videos provide clear guidance and smart tips to keep your machines in top condition.
Olsson Parts on YouTube
Tinkering tips with Olsson Parts – Renovate a hydraulic cylinder
Tractor mechanic Stefan Hildingsson shows different types of hydraulic cylinders and provides tips and advice regarding renovation or buying new ones. At 14:19 in the video, Stefan leaves the workshop to take a closer look at a hoist cylinder. The video ends with the replacement of a hydraulic cylinder on an old harrow.
Product tips with Olsson Parts – 6:2 valve provides more hydraulic functions
Range developer Stefan Ekblad provides tips about how to get more hydraulic functions on your tractor quickly and easily, using a 6:2 valve.
Tinkering tips with Olsson Parts – Replacement of hydraulic pump
In this video, tractor mechanic Stefan Hildingsson replaces the hydraulic pump on a Valtra and gives tips and advice on what you should consider during the process.
Get news, tips and promotions – straight to your inbox
Subscribe to our newsletter and receive the latest news, promotions, and maintenance tips directly to your inbox. It’s completely free, and you can easily unsubscribe at any time.
FAQ – Hydraulic Cylinders from Olsson Parts
What types of hydraulic cylinders does Olsson Parts offer?
Olsson Parts provides a wide selection of hydraulic cylinders for tractors and construction machines, including:
- Cylinders without mounts
- Cylinders with mounts
- Special cylinders for various attachments
Can I weld on a hydraulic cylinder?
Only the rear end and the piston rod end may be welded. Any other welding can deform the cylinder tube. When welding, the piston rod must be fully extended to protect the seals, and the rod should be shielded from welding splatter.
How do I install a hydraulic cylinder correctly?
- Make sure the piston rod is fully extended when welding.
- Use the correct mounts and tightening torque during installation.
- Ensure hydraulic hoses are properly connected and not twisted.
Olsson Parts offers guides and instructional videos for refurbishing and installing hydraulic cylinders: Tinkering tips – Hydraulic cylinder
How do I maintain the hydraulic cylinder?
- Keep the piston rod clean and free from dirt and debris.
- Check seals regularly and replace when necessary.
- Avoid overloading the cylinder beyond its specified capacity.
What should I do if the hydraulic cylinder is leaking?
First check connections and seals. If the leak persists, contact our customer service for advice or spare parts.
What is the delivery time for hydraulic cylinders?
Olsson Parts keeps many items in stock, but delivery times may vary depending on the product and stock status. Orders placed before 2 p.m. are generally shipped the same day.
How do I contact Olsson Parts?
Phone: +46 304-751070 (Weekdays 7 a.m. – 5 p.m. CET)
Customer service email: kundservice@olssonparts.com
Product inquiries email: order@olssonparts.com
Why should I choose Olsson Parts?
- Over 35,000 items in stock
- Spare parts for more than 5,000 tractor and construction models
- Expert advice and guides for installation and maintenance
Do you have a question?
Here we have collected common questions and answers.
Can’t find the answer to your question? Don’t hesitate to contact us!
FAQ / Frequently Asked Questions
